MARSHALL JCM2000 TSL 602
code: GTR.MRS.010.VAL.003
Marshall TSL-602 is a 2-speaker version of the TSL60. Clean, crunch, and lead channels, footswitchable with independent volume and gain knobs. Dishes out 60W of pure tube tone to 2 specially designed 12" speakers. Tube complement includes 4 ECC83s in the pre-amp and 2 EL34 power tubes. Footswitchable reverb has clean and crunch/lead controls. Channel controls are also dual: one set for clean (gain, bass, mid, treble) and the other for crunch and lead (gain, volume, bass, mid, treble) plus a tone shift switch to scoop mids. Also includes master volume, presence, and a deep switch for tight bass boost.
Features :
- 3 channels with independent volume and gain
- Independent EQ on the clean channel and shared EQ on the crunch and lead channels
- 60W Svetlana EL34 power section
- 2 -- 12" Wolverine speakers
- Individual reverb levels for clean and lead channels, off/on footswitchable
- 4 ECC83s in the pre-amp
- 2 EL34s in the power section
- 2 sets of channel controls
- Tone shift switch automatically scoops mids
- Deep switch boosts bass
Front Panel Features :
- Input Jack
- Clean Gain
- Clean Treble, Mid, Bass
- Channel Switching
- Crunch Channel Gain
- Crunch Channel Volume
- Lead Channel Gain (OD2 - Red LED)
- Lead Channel Volume
- Overdrive Treble, Middle, Bass
- Overdrive Tone Shift
- Master FX Mix
- Clean Reverb
- Overdrive Reverb
- Master Presence Control
- Deep Switch
- Master Volume
- Standby Switch
- Power Switch
Rear Panel Features :
- Footcontroller DIN Socket
- Loudspeaker Output Select
- Loudspeaker Output Jacks
- FX Loop Send Jack
- Loop Level Switch.
- FX Loop Return Jack
- Speaker Emulated D.I. Out XLR.
- H.T. Fuse - See specifications for correct value
- Mains Input
- Mains Fuse - See specifications for correct value
Specifications :
- Power Output 60 Watts RMS into 8 or 16 ohms
- Valve complement 4 x ECC83/12AX7 and 2 x EL34
- Loudspeaker Type TSL60 (None), TSL601 (1x Marshall 'Wolverine' type WH-80-16,
- TSL602 (2x Marshall 'Wolverine' type WH-80-8 connected in series for 16 ohm operation
- Mains Requirement Preset for 117V~60Hz or 230V~50Hz
- Other variations to special order see local distributor for information.
- Mains Fuse T3AL - 120V or TI6AC - 230V
- H.T. Fuse T500mAL