SWR CLASSIC SERIES SM-1500

code: GTR.081.SWR.015.HYB.001

Twin power amps with three modes of operation Bridge (mono) mode—1,500 watts @ 4-ohms Stereo mode—750 watts @ 2-Ohms (per side) Bi-Amp mode—with adjustable crossover frequency Tube preamp fueled by a 12AX7 dual triode tube Two front panel inputs plus one rear panel input with input select switch to accommodate multiple bass guitar setups World renowned SWR Aural Enhancer tone shaping World-class Compression with Comp Position selection Four Footswitch selectable features Bass Intensifier for maximum impact Boost to accent solos Three Semi-Parametric Equalizer configurations—choose from two independent 3-band Eq's or combine them into one 6-band EQ Stereo/mono Effects Loop with Effects Blend control Traditional Bass/Treble tone controls Speakon and 1/4" speaker outputs Power requirement: 1400W Power amp minimum impedance: 4 Ohm (Bridge Mode); 2 Ohms per channel (Normal, Stereo, Bi-Amp Modes) Sensitivity: 1.2V RMS, 1kHz @ Mono Return, Effects Blend at WET, Volume at MAX Power output: 1500W @ 4 Ohm (Bridge Mode); 750W @ 2 Ohms per channel (Normal, Stereo, Bi-Amp Modes) Pre amp input impedance: >820 kOhm (Front panel Inputs); 10k Ohm (Rear panel Input) Sensitivity for full power: 13mV @ 1kHz, Gain and Volume at MAX, all Bass, Mid and Treble controls flat (center detent), Aural Enhancer at mid position, Effects Blend at DRY, Bass Intensifier, Compression and Boost OFF Tone controls bass: ±15dB @ 70Hz Treble: ±15dB @ 3kHz Variable semi-parametric EQ: MID 1: ±15dB @ 30Hz to 200Hz Mid 2: ±15dB @ 165Hz—1.1kHz Mid 3: ±15dB @ 900Hz—6kHz Compression gain reduction: —22dB maximum, selectable PRE or POST EQ Threshold: —10dBV to +10dBV Ratio: 1:1 to 20:1 Attack time: 10mS to 600mS Release time: 500mS to 5.5S Effects loop send impedance: 220 Ohm Return impedance: 10k Ohm Balanced Balanced line out send impedance: 50 Ohm Active crossover response: 3—pole (18dB/octave) Butterworth Crossover frequency: 100Hz—2.0kHz Dimensions: 5.5"H x 19"W x 19.5"D Weight: 67 lb.